WBAHD6329SGK***** VIN lookup for 1995 BMW 525I (WBAHD6329SGK81522)
WBAHD6329SGK81522 VIN is assigned
to 1995 BMW 525I .
It is a PASSENGER CAR .
It was manufactured in BMW AG.
This BMW uses Gasoline and it's
engine
has 6 Cylinders with 188 HP.
This 1995 525I is a
Sedan/Saloon.
WBAHD6329SGK47242
WBAHD6329SGK47418
WBAHD6329SGK51159
WBAHD6329SGK57642
WBAHD6329SGK87045
| Air Bag Loc Front | 1st Row (Driver & Passenger) |
| Body Class | Sedan/Saloon |
| Displacement CC | 2495.7498472 |
| Displacement CI | 152.3 |
| Displacement L | 2.4957498472 |
| Doors | 4 |
| Engine Cylinders | 6 |
| Engine HP | 188 |
| Engine KW | 140.1916 |
| Engine Manufacturer | BMW-AG |
| Engine Model | 4-Value |
| Fuel Type Primary | Gasoline |
| Make | BMW |
| Manufacturer | BMW AG |
| Manufacturer Id | 966 |
| Model | 525i |
| Model Year | 1995 |
| NCSA Body Type | 4-door sedan, hardtop |
| NCSA Make | BMW |
| NCSA Model | 5-series |
| Other Restraint System Info | Driver and Passenger Supplemental Restraint System (SRS) |
| Plant City | Dingolfing |
| Plant Country | Germany |
| Seat Belts All | Manual |
| Series | 5 Series |
| VIN | WBAHD6329SGK47242 |
| Vehicle Type | PASSENGER CAR |
Driver Complaints
Recalls
August 04 , 1998 NHTSA Campaign Number: 98V178000
ENGINE AND ENGINE COOLING:COOLING SYSTEM
IF A CRACK WERE TO FORM OR A SEAM WERE TO SEPARATE IN THE HEATER CORE END PIECE, HOT COOLANT COULD SUDDENLY BE EXPELLED, INCREASING THE RISK OF PERSONAL INJURY TO A VEHICLE OCCUPANT.
Manufacturer: BAYERISCHE MOTOREN WERKE
Components: ENGINE AND ENGINE COOLING
Potential Number of Units Affected: 340,000
Description:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM PRESSURE. IF THE INDICATIONS OF A CRITICAL OVERHEATING CONDITION IS NOT NOTICED BY THE DRIVER, IT IS POSSIBLE THAT DAMAGE TO, OR FAILURE OF, A COOLANT SYSTEM COMPONENT COULD OCCUR.
Remedy:
DEALERS WILL INSTALL A NEW DESIGN RADIATOR CAP TO CONTROL PRESSURE AND PROVIDE GREATER COOLANT OVERFLOW IN THE EVENT OF OVERHEATING.
Notes:
OWNER NOTIFICATION BEGAN MARCH 31, 1999. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
August 19 , 1997 NHTSA Campaign Number: 97V131000
VEHICLE SPEED CONTROL
THIS COULD CAUSE THE THROTTLE VALVE TO REMAIN PARTIALLY OPEN. IT HIS WERE TO OCCUR, THE CAR MIGHT NOT DECELERATE AS EXPECTED INCREASING THE RISK OF A VEHICLE CRASH.
Manufacturer: BAYERISCHE MOTOREN WERKE
Components: VEHICLE SPEED CONTROL
Potential Number of Units Affected: 410,000
Description:
THE CRUISE CONTROL AND THROTTLE CABLES ARE ATTACHED TO THE SAME THROTTLE VALVE ACTUATING LEVER AT THE THROTTLE HOUSING. IT IS POSSIBLE THAT THE PLASTIC BUSHING ON EITHER CABLE COULD BREAK DUE TO ENVIRONMENTAL INFLUENCES COUPLED WITH VIBRATION. IF THE BUSHING BREAKS, THE OUTER CABLE HOUSING CAN SEPARATE FROM THE BUSHING. IN THIS CASE, DURING APPLICATION OF THE THROTTLE PEDAL WITHOUT CRUISE CONTROL BEING ENGAGED, THE OUTER TUBE COULD CATCH ON THE EDGE OF THE BROKEN BUSHING.
Remedy:
DEALERS WILL INSTALL A SPRING STEEL CLIP ON THE OUTER TUBE OF EACH CABLE IN THE AREA OF THE ADJUSTING SCREW AND PLASTIC BUSHING. THE CLIP IS DESIGNED TO PREVENT THE OUTER TUBE FROM DISLODGING FROM THE BUSHING.
Notes:
OWNER NOTIFICATION IS EXPECTED TO BEGIN BY THE END OF OCTOBER 1997. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
November 08 , 1994 NHTSA Campaign Number: 94V219000
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
THE OCCUPANTS OF THE VEHICLE WOULD BE UNABLE TO EXIT EITHER FROM THE DOORS OR FROM THE WINDOWS OF THE VEHICLE. DRIVE-AWAY PROTECTION WOULD PREVENT THE ENGINE FROM STARTING.
Manufacturer: BAYERISCHE MOTOREN WERKE
Components: LATCHES/LOCKS/LINKAGES
Potential Number of Units Affected: 2,180
Description:
THE DOUBLE-LOCK FEATURE CAN ENGAGE WITH OCCUPANTS AND THE DOOR/IGNITION KEY INSIDE THE VEHICLE.
Remedy:
DEALERS WILL REPLACE THE GENERAL CONTROL MODULE WITH ONE CONTAINING THE REVISED SOFTWARE TO PERMIT WINDOW OPENING WITH THE DOUBLE-LOCK ENGAGED AND KEY IN THE IGNITION.
Notes:
SYSTEM: STRUCTURE; DOOR ASSEMBLY; LATCHES AND LOCKS.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME OR THE REMEDY DOES NOT CORRECT THE DEFECT, PLEASE CONTACT BMW AT 1-800-831-1117. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Rating:
4.71 from 5
(4291 reviews)